Hunter I-10-ADV Shrub Rotor - Adjustable Arc with Check Valve

If you've ever desired the convenience of being able to use just one rotor to cover all of your needs, here it is.

Got a small area for which you don't want to create a separate spray zone? Is a portion of your landscape in sandy soil? Is the landscape a mix of shrub zones and expanses of grass? Does one part of the turf require a higher cut?

With all the features on today's I-20 Ultra and the I-10 shrub model (most notably its ability to effectively cover a radius range from 17 up to 47 feet) there's a single-sprinkler alternative to stocking a variety of rotors and sprays. With over 20 different nozzle choices, the I-20 Ultra rotor can handle the full range of irrigation needs.

Models

• I-10 - Shrub
• I-20 - 4" Pop-up (10 cm)
• I-20-6P - 6" Pop-up (15 cm)
• I-20-HP - 12" Pop-up (30 cm)

Dimensions

• Overall height:
  • I-10 - 7-3/4" (20 cm)
  • I-20 - 7-3/8" (19 cm)
  • I-20-6P - 9-7/8" (25 cm)
  • I-20-HP - 17" (43 cm)
• ¾" female inlet NPT
• Exposed diameter: 1¾" (4 cm) Operating Specifications
• Discharge rate: .9 to 14.8 GPM (0.20 to 3.36 m3/hr; 3.4 to 56.0 l/min)
• Radius: 17' to 47' (5.2 to 14.3 m)
• Recommended pressure range: 40 to 60 PSI (2.8 to 4.1 bars; 275 to 413 kPa)
• Operating pressure range: 20 to 100 PSI (1.4 to 6.9 bars; 137 to 689 kPa)
• Precipitation rates: approximately .4" (10 mm) per hour at 50 PSI (3.4 bars; 344 kPa) for spacing from 18' to 45' (5.5 to 13.7 m)
• Nozzle trajectory:
  • standard - 25°
  • low angle - 13°
• Drain check valve for up to 10' (3.0 m) elevation change

Warranty

• 5-year exchange, not prorated

Options Available

• Reclaimed water cover
• Stainless steel riser (4" & 6" I-20 only)
• Factory-installed nozzles (Standard and Low Angle only)